[1970-Jan-01 00:01:34.949413]: Loading settings from string...
[1970-Jan-01 00:01:35.240867]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:35.300353]: Rebuilding toolhead structure
[1970-Jan-01 00:01:35.340870]: Building bronx location 0...
[1970-Jan-01 00:01:35.536113]: Initialization: heater settings
[1970-Jan-01 00:01:35.537985]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:35.560809]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:35.591867]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:35.593783]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:35.595537]: Init endstop for axis: 2, type: switch, polarity: true
[1970-Jan-01 00:01:35.640837]: Parsing root settings...
[1970-Jan-01 00:01:35.699348]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:35.732143]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:35.733952]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:35.735734]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:35.737650]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 2 30 0
[1970-Jan-01 00:01:35.739824]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 30 0
[1970-Jan-01 00:01:35.752276]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:35.754400]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:35.756741]: syncing set to true
[1970-Jan-01 00:01:35.796230]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:35.836334]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:35.839840]: Have 1 valid ToolheadManager pointers, 0 is 0x1df828
[1970-Jan-01 00:01:35.984212]: setting driver address to 22
[1970-Jan-01 00:01:39.430873]: Init step: 0
[1970-Jan-01 00:01:39.480825]: Reset Toolhead Program State
[1970-Jan-01 00:01:39.482493]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:39.484262]: done
[1970-Jan-01 00:01:40.504929]: Init step: 1
[1970-Jan-01 00:01:40.522524]: done
[1970-Jan-01 00:01:41.008152]: Init step: 2
[1970-Jan-01 00:01:41.009968]: done
[1970-Jan-01 00:01:41.509203]: Init step: 3
[1970-Jan-01 00:01:41.677346]: done
[1970-Jan-01 00:01:42.021257]: Init step: 4
[1970-Jan-01 00:01:42.041747]: done
[1970-Jan-01 00:01:42.524088]: Init step: 5
[1970-Jan-01 00:01:42.545313]: done
[1970-Jan-01 00:01:43.026423]: Init step: 5
[1970-Jan-01 00:01:43.128485]: done
[1970-Jan-01 00:01:43.528256]: Init step: 5
[1970-Jan-01 00:01:43.596552]: done
[1970-Jan-01 00:01:44.041082]: Init step: 5
[1970-Jan-01 00:01:44.043000]: done
[1970-Jan-01 00:01:44.532746]: Init step: 5
[1970-Jan-01 00:01:44.540446]: done
[1970-Jan-01 00:01:45.034357]: Init step: 5
[1970-Jan-01 00:01:45.136374]: done
[1970-Jan-01 00:01:45.537008]: Init step: 5
[1970-Jan-01 00:01:45.551459]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:45.553360]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:45.555043]: done
[1970-Jan-01 00:01:46.039528]: Init step: 5
[1970-Jan-01 00:01:46.051797]: done
[1970-Jan-01 00:01:46.542551]: Init step: 5
[1970-Jan-01 00:01:46.550467]: done
[1970-Jan-01 00:01:47.044055]: Init step: 5
[1970-Jan-01 00:01:47.146186]: done
[1970-Jan-01 00:01:47.560302]: Init step: 5
[1970-Jan-01 00:01:47.563447]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:47.570494]: done
[1970-Jan-01 00:01:48.198689]: Init step: 5
[1970-Jan-01 00:01:48.211070]: done
[1970-Jan-01 00:01:48.721589]: Init step: 5
[1970-Jan-01 00:01:48.823632]: done
[1970-Jan-01 00:01:49.223587]: Init step: 5
[1970-Jan-01 00:01:49.226676]: Toolhead 0 state error: 54
[1970-Jan-01 00:01:49.228355]: Toolhead 0: Toolhead has Firmware version 1.7,736
[1970-Jan-01 00:01:49.237838]:  Toolhead 0 initialized
[1970-Jan-01 00:01:49.239571]: done
[1970-Jan-01 00:01:49.726031]: Init step: 6
[1970-Jan-01 00:01:49.727754]: done
[1970-Jan-01 00:01:50.228287]: Init step: 7
[1970-Jan-01 00:01:50.241140]: done
[1970-Jan-01 00:01:50.747271]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:51.740902]: bronx lowest mem space: 0x3b6 bytes
[1970-Jan-01 00:02:38.441150]: GetCachedToolUsageStats called
[1970-Jan-01 00:03:00.880907]: bronx lowest mem space: 0x3b2 bytes
[1970-Jan-01 00:04:46.314260]: GetCachedToolUsageStats called
[1970-Jan-01 00:04:46.447562]: GetCachedToolUsageStats called
[1970-Jan-01 00:04:57.816385]: bronx lowest mem space: 0x3a6 bytes
[1970-Jan-01 00:04:57.947423]: bronx lowest mem space: 0x39a bytes
[1970-Jan-01 00:04:59.291171]: Toolhead 0 state error: 80
[1970-Jan-01 00:04:59.297013]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 00:04:59.298833]: Checking tool eeprom version
[1970-Jan-01 00:04:59.300665]: Commanding tool usage stat retrieve
[1970-Jan-01 00:04:59.302392]: New tool uid 0x143c6 attached, updating info cache
[1970-Jan-01 00:04:59.347099]: Last sync period had (0,0,1239) buffer fulls due to suspend moves
[1970-Jan-01 00:04:59.349036]: Syncing turned false
[1970-Jan-01 00:04:59.354168]: TH0: 2 failures in last 107 packets (1.86916%)
[1970-Jan-01 00:04:59.357120]: Toolhead Abort
[1970-Jan-01 00:04:59.359106]: aborting pru with shutdown=true
[1970-Jan-01 00:04:59.362087]: Last sync period had (0,0,1239) buffer fulls due to suspend moves
[1970-Jan-01 00:04:59.363848]: Libstepper All Axis Abort
[1970-Jan-01 00:04:59.365462]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:04:59.367173]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:04:59.369158]: Commanding tool usage stat retrieve
[1970-Jan-01 00:04:59.412787]: Commanding tool usage stat retrieve
[1970-Jan-01 00:04:59.503837]: Commanding tool usage stat retrieve
[1970-Jan-01 00:05:02.465127]: Raw usage stats: retract 391548456ct, extrusion 181796732 steps, 855675 seconds, refurbed 0 times
[1970-Jan-01 00:05:02.467014]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:05:03.978808]: Raw usage stats: retract 391548456ct, extrusion 181796732 steps, 855675 seconds, refurbed 0 times
[1970-Jan-01 00:05:03.986673]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:05:05.486968]: Raw usage stats: retract 391548456ct, extrusion 181796732 steps, 855675 seconds, refurbed 0 times
[1970-Jan-01 00:05:05.488738]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:05:10.137926]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 00:05:10.139660]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:05:10.280247]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:05:10.667175]: bronx lowest mem space: 0x352 bytes
[1970-Jan-01 00:06:27.678392]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 00:06:27.681480]: Load Sense Limit Method: 1
[1970-Jan-01 00:06:27.684167]: Last sync period had (0,0,7230) buffer fulls due to suspend moves
[1970-Jan-01 00:06:27.686019]: Libstepper All Axis Abort
[1970-Jan-01 00:06:28.215150]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:06:28.465663]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 00:06:28.467517]: Toolhead Abort
[1970-Jan-01 00:06:28.469230]: aborting pru with shutdown=true
[1970-Jan-01 00:06:28.472418]: Last sync period had (0,0,7257) buffer fulls due to suspend moves
[1970-Jan-01 00:06:28.475115]: Libstepper All Axis Abort
[1970-Jan-01 00:06:28.512213]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 00:06:28.561606]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 00:06:28.591002]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 00:06:30.529046]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 00:06:30.541361]: Load Sense Limit Method: 0
[1970-Jan-01 00:06:30.544094]: Last sync period had (0,0,7398) buffer fulls due to suspend moves
[1970-Jan-01 00:06:30.546042]: Libstepper All Axis Abort
[1970-Jan-01 00:06:33.581496]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:06:38.966895]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:06:43.450347]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:06:44.620545]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 00:06:44.622370]: Toolhead Abort
[1970-Jan-01 00:06:44.624074]: aborting pru with shutdown=true
[1970-Jan-01 00:06:44.626911]: Last sync period had (0,0,8334) buffer fulls due to suspend moves
[1970-Jan-01 00:06:44.628670]: Libstepper All Axis Abort
[1970-Jan-01 00:06:44.687571]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 00:06:45.243010]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.307306]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.354575]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.387756]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.413090]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.437721]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.488971]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.525704]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.611533]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.665065]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.722468]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.748797]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.780973]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.859415]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.896053]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.935995]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.967843]: HOME: wait for buffer empty
[1970-Jan-01 00:06:45.999545]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.027825]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.092837]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.117263]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.153136]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.197401]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.229657]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.254940]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.295027]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.362696]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.412770]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.448710]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.497350]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.523165]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.549778]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.615271]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.641923]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.666713]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.692097]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.744715]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.777770]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.802897]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.868251]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.902889]: HOME: wait for buffer empty
[1970-Jan-01 00:06:46.952148]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.005025]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.040907]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.068021]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.160328]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.224856]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.275541]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.309218]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.343271]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.376034]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.415158]: HOME: wait for buffer empty
[1970-Jan-01 00:06:47.441561]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 00:06:48.530537]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:06:52.654682]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:06:56.829927]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:00.876068]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:05.032016]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:09.073962]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 00:07:09.075809]: Toolhead Abort
[1970-Jan-01 00:07:09.077537]: aborting pru with shutdown=false
[1970-Jan-01 00:07:09.080428]: Last sync period had (0,0,10206) buffer fulls due to suspend moves
[1970-Jan-01 00:07:09.082204]: Libstepper All Axis Abort
[1970-Jan-01 00:07:09.117980]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 00:07:09.162454]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 00:07:09.195497]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 00:07:09.424785]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:11.548092]: GAP: Query->Await
[1970-Jan-01 00:07:11.578897]: GAP: Await
[1970-Jan-01 00:07:11.619757]: GAP: Await
[1970-Jan-01 00:07:11.641026]: TH0: Retreived step position 11796751
[1970-Jan-01 00:07:11.656775]: wait for PRU status in get position
[1970-Jan-01 00:07:11.659218]: wait for PRU status in get position
[1970-Jan-01 00:07:11.661414]: GAP: Await->Done(Query)
[1970-Jan-01 00:07:11.739794]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 00:07:11.898864]: Syncing turned true
[1970-Jan-01 00:07:11.911804]: PRU Event: PRU_SYNC_ON(7)
[1970-Jan-01 00:07:12.014072]: Toolhead 0 commands idle
[1970-Jan-01 00:07:12.082045]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 00:07:12.262763]: Toolhead 0  ADC Error: 1
[1970-Jan-01 00:07:12.314595]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 00:07:12.316334]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 00:07:12.318015]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 00:07:12.319869]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 00:07:12.324394]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 00:07:12.326219]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 00:07:13.948921]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:17.493861]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:19.420614]: Buffer stall ongoing: 5547
[1970-Jan-01 00:07:19.468329]: Buffer stall ongoing: 15738
[1970-Jan-01 00:07:19.496607]: Buffer stall ongoing: 21672
[1970-Jan-01 00:07:19.522656]: Buffer stall ongoing: 27219
[1970-Jan-01 00:07:19.559637]: Buffer stall ongoing: 35088
[1970-Jan-01 00:07:19.609013]: Buffer stall ongoing: 45537
[1970-Jan-01 00:07:19.638427]: Buffer stall ongoing: 51729
[1970-Jan-01 00:07:19.654485]: Last sync period had (0,0,672) buffer fulls due to suspend moves
[1970-Jan-01 00:07:19.656276]: Syncing turned false
[1970-Jan-01 00:07:19.667841]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 00:07:19.669622]: Buffer stall ongoing: 55470
[1970-Jan-01 00:07:20.711612]: HES logged: false
[1970-Jan-01 00:07:20.743809]: HES logged: false
[1970-Jan-01 00:07:20.795060]: HES logged: false
[1970-Jan-01 00:07:20.825945]: HES logged: false
[1970-Jan-01 00:07:20.939545]: HES logged: false
[1970-Jan-01 00:07:21.002837]: HES logged: false
[1970-Jan-01 00:07:21.032576]: HES logged: false
[1970-Jan-01 00:07:21.065159]: HES logged: false
[1970-Jan-01 00:07:21.092805]: HES logged: false
[1970-Jan-01 00:07:21.135178]: HES logged: false
[1970-Jan-01 00:07:21.168031]: HES logged: false
[1970-Jan-01 00:07:21.195461]: HES logged: false
[1970-Jan-01 00:07:21.221467]: HES logged: false
[1970-Jan-01 00:07:21.262649]: HES logged: false
[1970-Jan-01 00:07:21.297105]: HES logged: false
[1970-Jan-01 00:07:21.328838]: HES logged: false
[1970-Jan-01 00:07:21.356465]: HES logged: false
[1970-Jan-01 00:07:21.429412]: HES logged: false
[1970-Jan-01 00:07:21.456879]: HES logged: false
[1970-Jan-01 00:07:21.487108]: HES logged: false
[1970-Jan-01 00:07:21.529332]: HES logged: false
[1970-Jan-01 00:07:21.575207]: HES logged: false
[1970-Jan-01 00:07:21.606358]: HES logged: false
[1970-Jan-01 00:07:21.635748]: HES logged: false
[1970-Jan-01 00:07:21.685659]: HES logged: false
[1970-Jan-01 00:07:21.712707]: HES logged: false
[1970-Jan-01 00:07:21.739143]: HES logged: false
[1970-Jan-01 00:07:21.770813]: HES logged: false
[1970-Jan-01 00:07:21.823501]: HES logged: false
[1970-Jan-01 00:07:21.850773]: HES logged: false
[1970-Jan-01 00:07:21.879991]: HES logged: false
[1970-Jan-01 00:07:21.952283]: HES logged: false
[1970-Jan-01 00:07:21.982706]: HES logged: false
[1970-Jan-01 00:07:22.011957]: HES logged: false
[1970-Jan-01 00:07:22.043532]: HES logged: false
[1970-Jan-01 00:07:22.095653]: HES logged: false
[1970-Jan-01 00:07:22.123678]: HES logged: false
[1970-Jan-01 00:07:22.149398]: HES logged: false
[1970-Jan-01 00:07:22.191342]: HES logged: false
[1970-Jan-01 00:07:22.229160]: HES logged: false
[1970-Jan-01 00:07:22.265282]: HES logged: false
[1970-Jan-01 00:07:22.293663]: HES logged: false
[1970-Jan-01 00:07:22.347213]: HES logged: false
[1970-Jan-01 00:07:22.377526]: HES logged: false
[1970-Jan-01 00:07:22.471016]: HES logged: false
[1970-Jan-01 00:07:22.568866]: HES logged: false
[1970-Jan-01 00:07:22.599969]: HES logged: false
[1970-Jan-01 00:07:22.652196]: HES logged: false
[1970-Jan-01 00:07:22.683136]: HES logged: false
[1970-Jan-01 00:07:22.714036]: HES logged: false
[1970-Jan-01 00:07:22.744964]: HES logged: false
[1970-Jan-01 00:07:22.795544]: HES logged: false
[1970-Jan-01 00:07:22.834719]: HES logged: false
[1970-Jan-01 00:07:22.861411]: HES logged: false
[1970-Jan-01 00:07:22.923415]: HES logged: false
[1970-Jan-01 00:07:22.954512]: HES logged: false
[1970-Jan-01 00:07:22.982588]: HES logged: false
[1970-Jan-01 00:07:23.022152]: HES logged: false
[1970-Jan-01 00:07:23.093362]: HES logged: false
[1970-Jan-01 00:07:23.131736]: HES logged: false
[1970-Jan-01 00:07:23.176352]: HES logged: true
[1970-Jan-01 00:07:24.700832]: Toolhead 0  ADC Error: 0
[1970-Jan-01 00:07:25.167349]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:28.715504]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:32.326322]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:35.872652]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:07:40.351138]: Toolhead Abort
[1970-Jan-01 00:07:40.352888]: aborting pru with shutdown=true
[1970-Jan-01 00:07:40.356464]: Last sync period had (0,0,2286) buffer fulls due to suspend moves
[1970-Jan-01 00:07:40.358379]: Libstepper All Axis Abort
[1970-Jan-01 00:07:40.593838]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:07:40.595610]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:08:07.294338]: GetCachedToolUsageStats called
[1970-Jan-01 00:08:07.441998]: GetCachedToolUsageStats called
[1970-Jan-01 00:08:07.954123]: GetCachedToolUsageStats called
[1970-Jan-01 00:08:21.143723]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:08:21.145499]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:08:22.389997]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:08:44.860902]: Toolhead 0 state error: 0
[1970-Jan-01 00:09:47.146868]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:09:52.395184]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:09:56.777348]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:01.491813]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:05.679700]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:10.042487]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:14.526346]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:19.319395]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:24.113151]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:29.198551]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:33.809146]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position -9743 status count 1001
[1970-Jan-01 00:10:34.189783]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:10:38.168294]: Raw HES proceeding
[1970-Jan-01 00:10:38.220237]: Got raw val 24303, saturated: true
[1970-Jan-01 00:10:38.256882]: Returning HES
[1970-Jan-01 00:10:38.258706]: Sending back val 24303, saturated true
[1970-Jan-01 00:10:38.383488]: Toolhead Abort
[1970-Jan-01 00:10:38.385361]: aborting pru with shutdown=true
[1970-Jan-01 00:10:38.397401]: Last sync period had (0,0,11658) buffer fulls due to suspend moves
[1970-Jan-01 00:10:38.399152]: Libstepper All Axis Abort
[1970-Jan-01 00:11:05.278678]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:11:05.290783]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:11:06.549116]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:11:11.763151]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:11:16.160274]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:11:20.332745]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:11:24.663856]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:11:24.884201]: Steps overrun! last 56446 and just got 1765
[1970-Jan-01 00:11:24.885916]: calculated 10854
[1970-Jan-01 00:11:29.013927]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:11:30.462635]: Toolhead 0 state error: 54
[1970-Jan-01 00:11:30.464487]: Tool UID becomes 0.
[1970-Jan-01 00:11:32.694224]: Toolhead Abort
[1970-Jan-01 00:11:32.696820]: aborting pru with shutdown=true
[1970-Jan-01 00:11:32.708085]: Last sync period had (0,0,13464) buffer fulls due to suspend moves
[1970-Jan-01 00:11:32.710183]: Libstepper All Axis Abort
[1970-Jan-01 00:11:32.954651]: Checking tool eeprom version
[1970-Jan-01 00:11:32.956318]: Commanding tool usage stat retrieve
[1970-Jan-01 00:11:32.958164]: New tool uid 0x143c6 attached, updating info cache
[1970-Jan-01 00:11:33.752224]: Toolhead 0 state error: 0
[1970-Jan-01 00:11:33.753922]: Connected tool has eepromv4
[1970-Jan-01 00:11:33.762652]: Raw usage stats: retract 391548456ct, extrusion 181796732 steps, 855675 seconds, refurbed 0 times
[1970-Jan-01 00:11:33.764754]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:11:40.236892]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:11:40.238675]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:11:41.525029]: Last sync period had (0,0,13545) buffer fulls due to suspend moves
[1970-Jan-01 00:11:41.527628]: Syncing turned false
[1970-Jan-01 00:11:41.529399]: Toolhead Abort
[1970-Jan-01 00:11:41.541575]: aborting pru with shutdown=true
[1970-Jan-01 00:11:41.550856]: Last sync period had (0,0,13545) buffer fulls due to suspend moves
[1970-Jan-01 00:11:41.552648]: Libstepper All Axis Abort
[1970-Jan-01 00:11:41.554271]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 00:11:41.556123]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:11:41.557979]: Commanding tool usage stat retrieve
[1970-Jan-01 00:11:41.611419]: Raw usage stats: retract 391548456ct, extrusion 181796732 steps, 855675 seconds, refurbed 0 times
[1970-Jan-01 00:11:41.613315]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:11:41.647032]: Commanding tool usage stat retrieve
[1970-Jan-01 00:11:41.685040]: Raw usage stats: retract 391548456ct, extrusion 181796732 steps, 855675 seconds, refurbed 0 times
[1970-Jan-01 00:11:41.687612]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 00:11:46.523051]: Toolhead 0 state error: 80
[1970-Jan-01 00:11:51.059334]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:11:51.071436]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:11:51.102942]: Toolhead 0 state error: 0
[1970-Jan-01 00:11:52.358855]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:12:41.515715]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:12:46.455658]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:12:51.382923]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:12:56.255422]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:13:01.446765]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:13:03.767535]:  wait for axis 0 full: false offset: 72 l3map offset:    90 status: 1 position -9743 status count 1001
[1970-Jan-01 00:13:06.498165]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:13:11.740873]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:13:16.659435]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:13:21.687095]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:13:26.312335]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:13:28.110348]: Raw HES proceeding
[1970-Jan-01 00:13:28.142699]: Got raw val 24302, saturated: true
[1970-Jan-01 00:13:28.171822]: Returning HES
[1970-Jan-01 00:13:28.173500]: Sending back val 24302, saturated true
[1970-Jan-01 00:13:28.289182]: Toolhead Abort
[1970-Jan-01 00:13:28.291379]: aborting pru with shutdown=true
[1970-Jan-01 00:13:28.298262]: Last sync period had (0,0,19893) buffer fulls due to suspend moves
[1970-Jan-01 00:13:28.300238]: Libstepper All Axis Abort
[1970-Jan-01 00:14:42.419757]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 00:14:42.424718]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 00:14:43.680766]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 00:14:54.629710]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:14:58.962593]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:03.304367]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:06.024500]: Steps overrun! last 56040 and just got 1359
[1970-Jan-01 00:15:06.030989]: calculated 10854
[1970-Jan-01 00:15:07.771399]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:12.209814]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:16.830423]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:21.184565]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:25.504226]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:29.902657]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:34.461148]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:34.581435]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position -9743 status count 1001
[1970-Jan-01 00:15:38.757626]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 00:15:41.589564]: Raw HES proceeding
[1970-Jan-01 00:15:41.685252]: Got raw val 24307, saturated: true
[1970-Jan-01 00:15:41.796363]: Returning HES
[1970-Jan-01 00:15:41.798025]: Sending back val 24307, saturated true
[1970-Jan-01 00:15:41.899557]: Toolhead Abort
[1970-Jan-01 00:15:41.913418]: aborting pru with shutdown=true
[1970-Jan-01 00:15:41.916129]: Last sync period had (0,0,24294) buffer fulls due to suspend moves
[1970-Jan-01 00:15:41.918044]: Libstepper All Axis Abort
[1970-Jan-01 00:16:10.344056]: Toolhead 0 state error: 80
[1970-Jan-01 00:17:49.442917]: Toolhead 0 state error: 56
[1970-Jan-01 00:17:51.458019]: Toolhead 0 state error: 80